PR12-4DN2 PROXIMITY SENSOR

This is a standard inductive proximity sensor with a M12 round, non-shielded installation and a 4mm sensing distance. It operates on a DC 3-wire power supply of 12-24VDC and has a standard cable connection. The standard sensing target is a 12x12x1mm iron piece and has a response frequency of 500Hz. The current consumption is a maximum of 10mA and the control output is NPN normally closed. The material of the sensor is brass with a nickel plating and has a protection structure of IP67. The ambient temperature for use and storage ranges from -25°C to 70°C and 35-95% relative humidity respectively. The hysteresis (distance) is a maximum of 10% of the sensing distance, with a residual voltage of a maximum of 1.5V. The sensor weighs approximately 84g and is part of the PR series. The header dimension is 12mm and the type of output is NPN.