ICE3B0365J - DIP

The CoolSET™-F3(Jitter version) meets the requirements for Off-Line Battery Adapters and low cost SMPS for the lower power range. By use of a BiCMOS technology a wideVCC range up to 26V is provided. This covers the changes in the auxiliary supply voltage if a CV/CC regulation is implemented on the secondary side. Furthermore an ActiveBurst Mode is integrated to fulfill the lowest Standby PowerRequirements <100mW at no load and Vin = 270VAC. During Active Burst Mode the controller is always active there is an immediate response on load jumps possible without any black out in the SMPS. In Active Burst Mode The ripple of the output voltage can be reduced <1%.Furthermore Auto Restart Mode is entered in case ofOvertemperature, VCC Overvoltage, Output Open loop orOverload and VCC Undervoltage. By means of the internal precise peak current limitation, the dimension of the transformer and the secondary diode can be lowered which leads to more cost efficiency