• This DC 100V 10A Ammeter Voltmeter is consist of 0.28 inch 5 wire red LED. With 100V DC can be measured by this meter with 0.1V resolution. This volt ammeter contains 2 wire harnesses. 2 poles with RED and BLACK lead used to provide power for the meters. this meter is portable and small in size. DSN-VC288 DC 100V 10A shows volt and ammeter at the same time on the same screen.
• Its operating voltages are 6 to 30 volts. This is a separate power supply that is isolated from the source, it is possible to use the same supply but it seems to affect the amp meter reading. 3 wire harness used for a ground.

Specifications:

• DSN-VC288 DC 100V 10A voltage measurement range is 0.0 to 100V.
• Its current test range is 0 to 999mA, with 0 to 10A.
• DC 4 to 30V is its power supply range.
• Its voltage error is -o.1%.
• Its current error is -1%.
• Its working current value is <20mA.
• Its refresh rate is almost 300mS once.
• It can display a double three-digit 0.28 inch LED digital tube.
• Its display color is RED and BLUE.
• Its size is 48 x 27 x 22mm.
• Its working temperature is -10 to 65 degrees centigrade.